Boxes.py


AllEdges

Showing all edge types

Settings for Finger Joints

angle
style

style of the fingers

surroundingspaces

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

finger

width of the fingers (multiples of thickness)

play

extra space to allow finger move in and out (multiples of thickness)

space

space between fingers (multiples of thickness)

width

width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle

inside angle of the feet

bottom_stabilizers

height of strips to be glued to the inside of bottom edges (multiples of thickness)

height

height of the feet (multiples of thickness)

holedistance

distance from finger holes to bottom edge (multiples of thickness)

width

width of the feet (multiples of thickness)

Settings for Hinges and HingePins

grip_percentage
outset

have lid overlap at the sides (similar to OutSetEdge)

pinwidth

set to lower value to get disks surrounding the pins

style

"outset" or "flush"

axle

diameter of the pin hole (multiples of thickness)

grip_length

fixed length of the grips on he lids (multiples of thickness)

hingestrength

thickness of the arc holding the pin in place (multiples of thickness)

Settings for Slide-on Lids

angle
hole_width

width of the "finger hole" in mm

second_pin

additional pin for better positioning

spring

position(s) of the extra locking springs in the lid

style

style of the fingers

surroundingspaces

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

finger

width of the fingers (multiples of thickness)

play

extra space to allow finger move in and out (multiples of thickness)

space

space between fingers (multiples of thickness)

width

width of finger holes (multiples of thickness)

Settings for Click-on Lids

angle

angle of the hooks bending outward

bottom_radius

radius at the bottom (multiples of thickness)

depth

length of the hooks (multiples of thickness)

Settings for Flex

stretch

Hint of how much the flex part should be shortened

connection

width of the gaps in the cuts (multiples of thickness)

distance

width of the pattern perpendicular to the cuts (multiples of thickness)

width

width of the pattern in direction of the cuts (multiples of thickness)

Settings for HandleEdge

height

height above the wall in mm

hole_height

height of hole(s) in percentage of maximum hole height (handle height - 2 * material thickness)

hole_width

width of hole(s) in percentage of maximum hole width (width of edge - (n+1) * material thickness)

on_sides

added to side panels if checked, to front and back otherwise (only used with top_edge parameter)

radius

radius of corners in mm

outset

extend the handle along the length of the edge (multiples of thickness)

AllEdges Settings

x

inner width in mm

Default Settings

thickness

thickness of the material (in mm) 🛈

format

format of resulting file 🛈

tabs

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

debug

print surrounding boxes for some structures 🛈

labels

label the parts (where available)

reference

print reference rectangle with given length (in mm)(zero to disable) 🛈

inner_corners

style for inner corners 🛈

burn

burn correction (in mm)(bigger values for tighter fit) 🛈




Поддержать проект: