Boxes.py


FlexBox3

Box with living hinge

Settings for Finger Joints

angle
style

style of the fingers

surroundingspaces

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

finger

width of the fingers (multiples of thickness)

play

extra space to allow finger move in and out (multiples of thickness)

space

space between fingers (multiples of thickness)

width

width of finger holes (multiples of thickness)

Settings for Flex

stretch

Hint of how much the flex part should be shortened

connection

width of the gaps in the cuts (multiples of thickness)

distance

width of the pattern perpendicular to the cuts (multiples of thickness)

width

width of the pattern in direction of the cuts (multiples of thickness)

FlexBox3 Settings

x

inner width in mm (unless outside selected)

y

inner depth in mm (unless outside selected)

outside

treat sizes as outside measurements 🛈

z

height of the box

h

height of the lid

radius

radius of the lids living hinge

c

clearance of the lid

Default Settings

thickness

thickness of the material (in mm) 🛈

format

format of resulting file 🛈

tabs

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

debug

print surrounding boxes for some structures 🛈

labels

label the parts (where available)

reference

print reference rectangle with given length (in mm)(zero to disable) 🛈

inner_corners

style for inner corners 🛈

burn

burn correction (in mm)(bigger values for tighter fit) 🛈




Поддержать проект: