Generator for keypads with mechanical switches.
style of the fingers
space at the start and end in multiple of normal spaces
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
width of the fingers (multiples of thickness)
extra space to allow finger move in and out (multiples of thickness)
space between fingers (multiples of thickness)
width of finger holes (multiples of thickness)
height of the box
thickness of the button hold layer, cherry like switches need 1.5mm or smaller to snap in
enables another top layer that can hold CPG151101S11 hotswap sockets
thickness of the hotplug layer, CPG151101S11 hotswap sockets need 1.2mm to 1.5mm
adds holes for pcb mount switches
adds pin holes under switches for leds
adds pin holes under switches for diodes
Shape of the plate cutout: 'castle' allows for modding, and 'simple' is a tighter and simpler square
Each column is separated by '/', and is in the form 'nb_rows @ offset x repeat_count'. Nb_rows is the number of rows for this column. The offset is in mm and optional. Repeat_count is optional and repeats this column multiple times. Spaces are not important.For example '3x2 / 4@11' means we want 3 columns, the two first with 3 rows without offset, and the last with 4 rows starting at 11mm high.
thickness of the material (in mm) 🛈
format of resulting file 🛈
width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
print surrounding boxes for some structures 🛈
label the parts (where available)
print reference rectangle with given length (in mm)(zero to disable) 🛈
style for inner corners 🛈
burn correction (in mm)(bigger values for tighter fit) 🛈
Save to URL
Note that top layers use a different material thickness according to the top1_thickness and top2_thickness (if enabled).