Boxes.py


WallPliersHolder

Bar to hang pliers on

Settings for Finger Joints

angle
style

style of the fingers

surroundingspaces

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

finger

width of the fingers (multiples of thickness)

play

extra space to allow finger move in and out (multiples of thickness)

space

space between fingers (multiples of thickness)

width

width of finger holes (multiples of thickness)

Settings for plain WallEdges

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for SlatWallEdges

bottom_hook

"spring", "stud" or "none"

hook_depth

horizontal width of the hook

hook_distance

horizontal space to the hook

hook_height

height of the horizontal bar of the hook

hook_overall_height

height of the hook top to bottom

pitch

vertical spacing of slots middle to middle (in mm)

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

hook_extra_height

space surrounding connectors (multiples of thickness)

Settings for DinRailEdges

bottom

"stud" or "none"

depth

horizontal width of the hook

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for FrenchCleatEdges

angle

angle of the cut (0 for horizontal)

bottom

"stud", "hook" or "none"

depth

horizontal width of the hook in mm

spacing

distance of the cleats in mm (for bottom hook)

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

WallPliersHolder Settings

walltype

Type of wall system to attach to

sx

sections left to right in mm 🛈

y

inner depth in mm (unless outside selected)

h

inner height in mm (unless outside selected)

outside

treat sizes as outside measurements 🛈

angle

bracing angle - less for more bracing

Default Settings

thickness

thickness of the material (in mm) 🛈

format

format of resulting file 🛈

tabs

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

debug

print surrounding boxes for some structures 🛈

labels

label the parts (where available)

reference

print reference rectangle with given length (in mm)(zero to disable) 🛈

inner_corners

style for inner corners 🛈

burn

burn correction (in mm)(bigger values for tighter fit) 🛈




Поддержать проект: